VCS VIP 1000 Guia do Utilizador descarregar pdf (Página 52)

Configuring the Sender Chapter 6

52 VIP 1000

Video loss alarm:

Select On if the unit is to activate an alarm whenever the video signal is

interrupted.

Contrast alarm:

The VIP can trigger an alarm if the camera image shows too little contrast,

possibly indicating that the lens has been sprayed with paint or covered in some

way. Select On to enable this function.

Motion alarm:

Select On if the unit is to respond to a motion alarm.

Motion detection is configured on a separate page (see page 54).

Alarm input 1 ... Alarm input 2:

Select the option On in order to activate the alarm via the corresponding external

alarm sensor. Otherwise, select Off.

Choose Active high to trigger the alarm closing the contact. Choose Active low

to trigger the alarm opening the contact.

Name:

You can enter a name for each alarm input, which is then displayed next to the

icon for the alarm input on the video live page when configured accordingly (see

page 67).

1./2. SNMP host address:

Enter the IP addresses of up to two chosen receivers here if SNMP-traps are to

be sent.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 125 126

Sem comentários

VCS VIP 1000 Guia do Utilizador Página 52